BULK SILICA
C18 Phases: SP-ODS-HP
The ODS-HP Series offers the highest possible bonding density using our most advanced endcapping technology, while not compromising on surface area. Its 24% carbon loading is the highest of our ODS phases. The additional carbon increases retention time to stretch your peaks even further apart, allowing separation of your product of interest from very closely-related impurities.
Our proprietary endcapping combined with the high carbon content guarantees stability across an extremely wide pH range, giving further flexibility to your operating conditions.
Typical Applications
Highest bonding density and wide pH range for challenging separations.
Small Molecules
Synthetic Peptides
Endcapping + Loadability
The high surface area of 450 m2/g allows you to achieve high loadability of your product.
With its special combination of the best endcapping and highest surface area, the ODS-HP Series is suitable for your most difficult separations of synthetic peptides and small molecules.
24.0%
Carbon Loading
1.1 mL/g
Pore Volume
450 m2/g
Surface Area
Available in 100 Å pore size and 3, 5, 10 and 15 μm particle sizes
Ordering Information (Bonded Phase C18)
| Product Name | Pore Size (Å) | Particle Size (µm) | Pore Volume (mL/g) | Surface Area (m2/g) | % of Carbon |
|---|---|---|---|---|---|
| SP-100-3-ODS-HP | 100 | 3 | 1.1 | 450 | 24.0 |
| SP-100-5-ODS-HP | 100 | 5 | 1.1 | 450 | 24.0 |
| SP-100-8-ODS-HP | 100 | 8 | 1.1 | 450 | 24.0 |
| SP-100-10-ODS-HP | 100 | 10 | 1.1 | 450 | 24.0 |
| SP-100-15-ODS-HP | 100 | 15 | 1.1 | 450 | 24.0 |
Did you know?
HP stands for “High Performance,” as this series can overcome your extremely difficult separation challenges.
Other DAISOGEL Products in HP Series